价格:
0.00/桶
品牌:KLUBER UNISILKON L 643
起订:1桶
供应:99桶
发货:1天内
信息标签:KLUBER UNISILKON L 643《@》,供应,能源,润滑油(脂)
点击这里进行电话呼叫
点击这里QQ咨询
联系时一定要说在【贸易商务资源网】看到的将给您优惠!如果您也想和该公司一样在网站发信息有好排名,点击立即免费注册,发布产品推广。
KLUBER UNISILKON L 643《@》,现货,价格/优惠价出售,克鲁勃润滑油,欢迎咨询:18682102569.
UNISILKON L 641 643
Special grease for drinking water, beverage and heating valves
Product deSCRJPTion
UNISILKON L 641 is a special lubricating grease based on silicone oil and PTFE for valves and other elements in the heating, beverage and sanitary sector. UNISILKON L 641 offers good penetration ability in small lubrication gaps and lube points of difficult access. As its viscosity is rather independent from service temperatures, UNISILKON L 641 allows constant actuating forces within the whole cold/hot water range of single-lever mixer taps. The grease is compatible with most substances in the food-processing and beverage industries like beer, milk, juices, liquors, acid and alkaline disinfectants. UNISILKON L 641 is not compatible with most organic solvents as well as acid and alkaline solutions.
Benefits for your application
Excellent wetting power
Operational smoothness due to a good viscosity-temperature behaviour
Excellent resistance to hot and cold water, steam
High thermal stability
Good sealing effect
Neutral towards metals, elastomers and plastics
NSF H1 registered
Certified acc. to DVGW-KTW, WRAS and NSF Standard 61
UNISILKON L 250 L
Special lubricating grease for drinking water, beverage and heating valves and fittings
Product deSCRJPTion
UNISILKON L 250 L is a special lubricant based on silicone oil and PTFE with high thermal stability. UNISILKON L 250 L offers good penetration ability in small lubrication gaps and lube points of difficult access. Owing to its relatively high viscosity, adhesion is improved even in case of unfavourable geometries. UNISILKON L 250 L is resistant to cold and hot water, superheated steam up to approx. 130 °C as well as industrial cleaning agents and disinfectants. UNISILKON L 20 L is also resistant to pumpable foodstuffs and beverages like fruit juices, beer or milk products. UNISILKON L 250 L is not resistant to organic solvents or strong acid and alkaline solutions.
Benefits for your application
Proven effective in valves and fittings as well as adjusting mechanisms in the drinking water, beverage, sanitary and heating sectors
Certified acc. to international standards for valves and fittings, e.g. DVGW-KTW, WRAS, ACS, AS 4020, NSF Standard 61 and NSF H1
Long-term protection of seals and bearings owing to the lubricant’s good resistance to numerous media like disinfectants, cleaning agents, water, steam
UNISILKON L 200
Special lubricating grease for tap water and heating fittings
Product deSCRJPTion
UNISILKON L 200 is a special lubricating grease based on silicone oil and PTFE. The product meets the legislative provisions of the German Health Authority governing the use of plastics and drinking water (DVGW-KTW). It is also approved by WRC (Water Research Centre), Great Britain.
Benefits for your application
Good sealing effect
High thermal stability
High resistance to many aqueous solutions
Neutral towards many plastics and elastomers, e.g. ABS, PC, EPDM, NBR
Excellent resistance to cold and hot water, water steam
Certified acc. to DVGW-KTW and WRC
UNISILKON L 50/2
High-temperature grease for a wide service temperature range
Product deSCRJPTion
Manufacturers and operators in the wood, textile or paper industry have to lubricate rolling bearings subject to high temperatures.
Benefits for your application
Made of special raw materials to ensure long-term and for-life lubrication at high temperatures
Wear reduction for increased component availability due to its good pressure absorption capacity
Versatile use due to good compatibility with aqueous solutions
UNISILKON GLK 112
Special grease for Bowden cables, seals and plastics
Product deSCRJPTion
UNISILKON GLK 112 ensures smooth running of components at low temperatures and is at the same time resistant to high temperatures. It is based on silicone oil and a special lithium soap. The product is compatible with many different elastomers (but not silicone rubber) and plastics. Approval VW TL 767 X.
Benefits for your application
Good low-temperature characteristics and wide service temperature range
Good compatibility with elastomers and plastics
Good wetting of functional surfaces
UNIMOLY PA Spray
Molybdenum disulphide spray paste
Product deSCRJPTion
UNIMOLY PA Spray is a sprayable, highly concentrated solid lubricant paste of black colour. It is based on paraffin mineral oil, silicate and a solid lubricant mixture (MoS2 and graphite). No lead, cadmium, nickel, chromium or halogen raw materials are used for the manufacture of this product. UNIMOLY PA Spray protects against running-in damage in plain bearings, gears and bushings and prevents clattering of slideways.
Benefits for your application
Protects against running-in damage and prevents fretting
Prevents clattering of slideways
UNIMOLY OIL 100 150 220 320 460 680 1000 1500 Multipurpose oils with solid lubricant
Product deSCRJPTion
UNIMOLY Oils are multipurpose lubricants based on mineral oil and molybdenum disulphide (MoS2) solid lubricant providing good load-carrying capacity and emergency lubricating properties. UNIMOLY Oils offer good corrosion protection and oxidation stability.
Benefits for your application
High load-carrying capacity
Wear protection
UNIMOLY HTC metaLLIC
High-temperature paste containing graphite and metal
Product deSCRJPTion
UNIMOLY HTC metaLLIC is a high-temperature lubricating and assembly paste containing graphite and metal. It has a chemical comPOSTTTION of mineral oil, lithium soap and a solid lubricant mixture. Above a temperature of 150 °C the base oil evaporates and leaves a dry lubricating film. The paste contains no lead, nickel, sulphur, barium and halogens.
Benefits for your application
Ensures easy disassembly even after the influence of high temperatures
High pressure absorption capacity
Prevents stick slip
Meets the requirements set forth by automobile manufacturers
Also available as spray (UNIMOLY HTC metaLLIC Spray, art. No. 081047)
UNIMOLY GL 402
Adhesive long-term grease
Product deSCRJPTion
UNIMOLY GL 402 is an adhesive long-term grease based on mineral oil, lithium soap and MoS2. Solid lubricants plus EP additives ensure excellent emergency lubricating properties as well as friction reduction and prevention of wear. UNIMOLY GL 402 is especially suitable for the lubrication of rolling and plain bearings subject to high loads at low rotational or sliding speeds.
Benefits for your application
High-performance grease with MoS2
Reduces wear
Good corrosion protection
Resistant to ageing and oxidation
Good worked stability
UNIMOLY GL 82
Lubricating grease containing MoS2
Product deSCRJPTion
UNIMOLY GL 82 is a high-performance lubricant consisting of mineral oil, lithium soap and MoS2 solid lubricants. It is resistant to water, oxidation and churning. UNIMOLY GL 82 has good anti-corrosion properties, reduces friction and wear and ensures extended relubrication intervals.
Benefits for your application
High-performance grease containing MoS2
Good corrosion protection
Ageing and oxidation resistant
Reduces wear
Water resistant
UNIMOLY GB 2
High-temperature grease for rolling bearings
Product deSCRJPTion
UNIMOLY GB 2 is a high-temperature lubricating grease based on mineral oil, silicate and molybdenum disulphide.
Benefits for your application
For lubrication points subject to high loads
Emergency running properties
Good dampening effect
UNIMOLY C 220 Spray
High-pressure resistant, hygrosetting bonded coating
Product deSCRJPTion
UNIMOLY C 220 is a hygrosetting grey bonded coating with an MoS2 base (molybdenum disulfide) and an inorganic binding agent. UNIMOLY C 220 is a fluid, ready-to-use product containing a mixture of flammable solvents. once applied and hardened, the bondec coating is very resistant to pressure and has a wide temperature range. Owing to its structure, UNIMOLY C 220 is particularly suitable for high-vacuum applications. Adhesion is very good on special steel, metal and electroplated surfaces.
Benefits for your application
Hygrosetting at room temperature
Suitable for high pressures
Resistant to low and high temperatures
Suitable for vacuum applications
Excellent adhesion on metals
Suitable for materials susceptible to cold welding, e.g. special steel nuts and bolts
Well-proven as an assembly aid
Improves the running-in process
Prevents stick-slip
UNIMOLY C 220
High-pressure resistant, hygrosetting bonded coating
Product deSCRJPTion
UNIMOLY C 220 is a hygrosetting grey bonded coating with an MoS2 base (molybdenum disulfide) and an inorganic binding agent. UNIMOLY C 220 is a fluid, ready-to-use product containing a mixture of flammable solvents. once applied and hardened, the bondec coating is very resistant to pressure and has a wide temperature range. Owing to its structure, UNIMOLY C 220 is particularly suitable for high-vacuum applications. Adhesion is very good on special steel, metal and electroplated surfaces.
Benefits for your application
Hygrosetting at room temperature
Suitable for high pressures
Resistant to low and high temperatures
Suitable for vacuum applications
Excellent adhesion on metals
Suitable for materials susceptible to cold welding, e.g. special steel nuts and bolts
Well-proven as an assembly aid
Improves the running-in process
Prevents stick-slip
UNIGEAR LA 02
Gear grease
Product deSCRJPTion
UNIGEAR LA 02 is a gear grease based on mineral oil for a wide service temperature range. The grease offers excellent wear protection.
Benefits for your application
Good adhesion
Good wear protection
VARILUB NBU 15/300
Spindle bearing grease
Product deSCRJPTion
VARILUB NBU 15/300 is a high-speed grease with good pressure absorption properties. It consists of ester oil, synthetic hydrocarbon oil and mineral oil as well as a barium complex soap. VARILUB NBU 15/3000 offers good corrosion and wear protection, resistance to water and media as well as ageing and oxidation stability.
Benefits for your application
Savings in costs for bearings due to the good corrosion and wear protection as well as pressure absorption capacity of the grease, therefore long service life and maintenance intervals
Reduced wastewater disposal costs due to good water resistance resulting in a long service life and relubrication intervals
Trouble-free operation of machines due to easy pumpability and metering in central lubrication systems
VARILUB ALZ 250
Grease for plug cocks, especially in coking plants
Product deSCRJPTion
VARILUB ALZ 250 is a grease based on mineral oil and an alumin-ium soap thickener.
Benefits for your application
Good sealing effect
Good pressure absorption capacity
Good adhesion
WOLFRASYN UL 91 M
High-temperature grease with dry lubricant effect up to 400 °C
Product deSCRJPTion
WOLFRASYN UL 91 M is a high-temperature grease based on polyalkylene glycol and a lithium soap thickener. After evaporation of the base oil the molybdenum disulphide solid lubricant forms a dry film which is effective up to 400 °C.
Benefits for your application
Lubricating capacity up to 400 °C
Good corrosion protection
High water resistance
WOLFRASYN UL 129 G 10
Graphite suspension for sliding points and guides subject to high temperatures and loads
Product deSCRJPTion
WOLFRASYN UL 129 G 10 is a graphite suspension based on polyalkylene glycol for high-temperature applications.
Benefits for your application
Forms a dry lubricating film at temperatures above 200 °C
Wear reduction
Corrosion protection
Contains graphite
WOLFRASYN ULAF
Graphite containing high-temperature paste
Product deSCRJPTion
WOLFRASYN ULAF is a graphite-containing high-temperature paste for thin-film lubrication of rolling and plain bearings. It has a chemical comPOSTTTION of polyalkylene glycol oil and an inorganic solid lubricant (graphite). The synthetic base oil evaporates at temperatures above 200 °C. The solid lubricant residue is effective up to 400 °C as a dry lubricant.
Benefits for your application
For the thin-film lubrication of low-speed rolling and plain bearings
For lubricant applications up to 400 °C
Also suitable for low temperatures
High load-carrying capacity
WOLPASIT SECURO FLUID
Bonded coating for guideways in machine tools
Product deSCRJPTion
WOLPASIT SECURO FLUID is an air-drying inorganic bonded coating forming a lubricating layer on steel and cast iron surfaces. WOLPASIT SECURO FLUID was developed to prevent stick-slip on machine tool guideways. WOLPASIT SECURO FLUID coatings improve the sliding characteristics under boundary and mixed friction conditions. If surfaces slide along one another (even very smooth ones), the roughness peaks are in contact. As these roughness peaks determine the load-bearing area of the surfaces, the specific surface pressures and friction forces can be very high. only when full-fluid friction is attained, the roughness peaks are separated by a lubricant film. In the boundary and mixed friction regime, surfaces with low coefficients are more likely to prevent stick-slip. The reduction of the friction coefficient is due to the fact that the solid lubricants are deposited on the friction surface, which leads to a higher load-bearing ratio. In the mixed friction regime, WOLPASIT SECURO FLUID is subject to plastic levelling. While the solid lubricant may no longer be visible on the friction surfaces after a short time, the functional layer is retained.
Benefits for your application
Better sliding characteristics in the mixed friction regime
Prevents stick-slip
Enhances emergency running properties
WOLFRAPRESS WF 165 X 210 STICK
Lubricant sticks for extrusion moulding
Product deSCRJPTion
Benefits for your application
Prevent material welding between extruded part, dummy block and moulding die
Improve flow of material in the mould
When applied properly, no transfer of lubricant particles into the moulded structures
No inflammation while applying the product
Highly economical alloy-dependent service time of 290-420 operating hours per stick
WOLFRAPAN M/FE TROCKENSCH.
Thermosetting bonded coating for reflection-free surfaces in the optical industry
Product deSCRJPTion
WOLFRAPAN M/FE is a thermosetting bonded coating based on polytetrafluoroethylene (PTFE) and an organic binder. WOLFRAPAN M/FE is of fluid consistency, ready to use and contains a mixture of solvents classified into the A II group according to the relevant statutory order on combustible liquids. When WOLFRADIN M/FE has been applied and hardened, it offers a very low friction coefficient, stick-slip-free operation, high wear stability and resistance to chemicals and oils.
Benefits for your application
Bonded coating for metal surfaces
Very low friction coefficient
High wear resistance
Good resistance to chemicals and oils
WOLFRAKOTE TOP PASTE
High-temperature paste
Product deSCRJPTion
WOLFRAKOTE TOP PASTE is a grey high-temperature paste based on high-quality hydrocarbon oils and temperature-resistant solid lubricants.
Benefits for your application
Reliable dry lubrication at high to extreme temperatures
Prevents seizure of e.g. bolts and hinges
Tried-and-tested long-term ladle dressing during casting of nonferrous metals
WOLFRAKOTE TOP FLUIDS
Solid lubricant suspensions for high-temperature applications
Product deSCRJPTion
WOLFRAKOTE TOP FLUID and WOLFRAKOTE TOP FLUID S are suspensions containing solid lubricant based on mineral and hydrocarbon oils. Upon evaporation of the base oil at temperatures above 200°C the solid lubricants provide dry lubrication.
Benefits for your application
For high temperatures up to approx. 1000°C
Good wetting power
Good penetrating properties
WOLFRAKOTE TOP FLUID
Solid lubricant suspensions for high-temperature applications
Product deSCRJPTion
WOLFRAKOTE TOP FLUID and WOLFRAKOTE TOP FLUID S are suspensions containing solid lubricant based on mineral and hydrocarbon oils. Upon evaporation of the base oil at temperatures above 200°C the solid lubricants provide dry lubrication.
Benefits for your application
For high temperatures up to approx. 1000°C
Good wetting power
Good penetrating properties
WOLFRAKOTE SSP Spray
Lubricating, assembly and screw paste up to 1400 °C
Product deSCRJPTion
WOLFRAKOTE SSP Spray is a high-temperature paste which can be applied in a temperature range from –15 to +1400 °C. It is based on hydrocarbon oil and inorganic solid lubricants. Above 200°C, WOLFRAKOTE SSP Spray provides dry lubrication. For the manufacture of this product no raw materials based on lead, nickel, barium, cadmium, chromium or halogen are used.
Benefits for your application
High-temperature paste up to 1400 °C
Prevents fretting of bolts, hinges and screw connections
Free of raw materials based on lead, nickel, barium, cadmium, chromium and halogen