KLUBER WOLFRASYN ULAF《@》
发布时间:2016-05-17 21:51:22 产品编号:GY-5-82572605 分享
价格:
0.00/桶
品牌:KLUBER WOLFRASYN ULAF
起订:1桶
供应:99桶
发货:1天内
信息标签:KLUBER WOLFRASYN ULAF《@》,供应,能源,润滑油(脂)
点击这里进行电话呼叫
点击这里QQ咨询
联系时一定要说在【贸易商务资源网】看到的将给您优惠!如果您也想和该公司一样在网站发信息有好排名,点击立即免费注册,发布产品推广。
KLUBER WOLFRASYN ULAF《@》,现货,价格/优惠价出售,克鲁勃润滑油,欢迎咨询:18682102569.
WOLFRASYN ULAF
Graphite containing high-temperature paste
Product deSCRJPTion
WOLFRASYN ULAF is a graphite-containing high-temperature paste for thin-film lubrication of rolling and plain bearings. It has a chemical comPOSTTTION of polyalkylene glycol oil and an inorganic solid lubricant (graphite). The synthetic base oil evaporates at temperatures above 200 °C. The solid lubricant residue is effective up to 400 °C as a dry lubricant.
Benefits for your application
For the thin-film lubrication of low-speed rolling and plain bearings
For lubricant applications up to 400 °C
Also suitable for low temperatures
High load-carrying capacity
WOLPASIT SECURO FLUID
Bonded coating for guideways in machine tools
Product deSCRJPTion
WOLPASIT SECURO FLUID is an air-drying inorganic bonded coating forming a lubricating layer on steel and cast iron surfaces. WOLPASIT SECURO FLUID was developed to prevent stick-slip on machine tool guideways. WOLPASIT SECURO FLUID coatings improve the sliding characteristics under boundary and mixed friction conditions. If surfaces slide along one another (even very smooth ones), the roughness peaks are in contact. As these roughness peaks determine the load-bearing area of the surfaces, the specific surface pressures and friction forces can be very high. only when full-fluid friction is attained, the roughness peaks are separated by a lubricant film. In the boundary and mixed friction regime, surfaces with low coefficients are more likely to prevent stick-slip. The reduction of the friction coefficient is due to the fact that the solid lubricants are deposited on the friction surface, which leads to a higher load-bearing ratio. In the mixed friction regime, WOLPASIT SECURO FLUID is subject to plastic levelling. While the solid lubricant may no longer be visible on the friction surfaces after a short time, the functional layer is retained.
Benefits for your application
Better sliding characteristics in the mixed friction regime
Prevents stick-slip
Enhances emergency running properties
WOLFRAPRESS WF 165 X 210 STICK
Lubricant sticks for extrusion moulding
Product deSCRJPTion
Benefits for your application
Prevent material welding between extruded part, dummy block and moulding die
Improve flow of material in the mould
When applied properly, no transfer of lubricant particles into the moulded structures
No inflammation while applying the product
Highly economical alloy-dependent service time of 290-420 operating hours per stick
WOLFRAPAN M/FE TROCKENSCH.
Thermosetting bonded coating for reflection-free surfaces in the optical industry
Product deSCRJPTion
WOLFRAPAN M/FE is a thermosetting bonded coating based on polytetrafluoroethylene (PTFE) and an organic binder. WOLFRAPAN M/FE is of fluid consistency, ready to use and contains a mixture of solvents classified into the A II group according to the relevant statutory order on combustible liquids. When WOLFRADIN M/FE has been applied and hardened, it offers a very low friction coefficient, stick-slip-free operation, high wear stability and resistance to chemicals and oils.
Benefits for your application
Bonded coating for metal surfaces
Very low friction coefficient
High wear resistance
Good resistance to chemicals and oils
WOLFRAKOTE TOP PASTE
High-temperature paste
Product deSCRJPTion
WOLFRAKOTE TOP PASTE is a grey high-temperature paste based on high-quality hydrocarbon oils and temperature-resistant solid lubricants.
Benefits for your application
Reliable dry lubrication at high to extreme temperatures
Prevents seizure of e.g. bolts and hinges
Tried-and-tested long-term ladle dressing during casting of nonferrous metals
WOLFRAKOTE TOP FLUIDS
Solid lubricant suspensions for high-temperature applications
Product deSCRJPTion
WOLFRAKOTE TOP FLUID and WOLFRAKOTE TOP FLUID S are suspensions containing solid lubricant based on mineral and hydrocarbon oils. Upon evaporation of the base oil at temperatures above 200°C the solid lubricants provide dry lubrication.
Benefits for your application
For high temperatures up to approx. 1000°C
Good wetting power
Good penetrating properties
WOLFRAKOTE TOP FLUID
Solid lubricant suspensions for high-temperature applications
Product deSCRJPTion
WOLFRAKOTE TOP FLUID and WOLFRAKOTE TOP FLUID S are suspensions containing solid lubricant based on mineral and hydrocarbon oils. Upon evaporation of the base oil at temperatures above 200°C the solid lubricants provide dry lubrication.
Benefits for your application
For high temperatures up to approx. 1000°C
Good wetting power
Good penetrating properties
WOLFRAKOTE SSP Spray
Lubricating, assembly and screw paste up to 1400 °C
Product deSCRJPTion
WOLFRAKOTE SSP Spray is a high-temperature paste which can be applied in a temperature range from –15 to +1400 °C. It is based on hydrocarbon oil and inorganic solid lubricants. Above 200°C, WOLFRAKOTE SSP Spray provides dry lubrication. For the manufacture of this product no raw materials based on lead, nickel, barium, cadmium, chromium or halogen are used.
Benefits for your application
High-temperature paste up to 1400 °C
Prevents fretting of bolts, hinges and screw connections
Free of raw materials based on lead, nickel, barium, cadmium, chromium and halogen
联系方式