The Intelligent Operator Panel IOP is a very user-friendly and powerful operator panel for SINAMICS S110.

The IOP supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu-based operation and the application wizards, it is easy to commission the drive. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and a parameter filtering function are provided.

The drives are easily controlled manually using directly assigned buttons and the navigation wheel. The IOP has a dedicated switchover button to switch from automatic to manual mode.

The inverter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized simultaneously on the status screen/display. Process values can also be displayed in technological units.

The IOP supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP and downloaded into other drive units of the same type as required.

The IOP is available in 2 versions with the following languages ¹⁾:

• German, English, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Czech, Polish, Turkish, Finnish
• Chinese (simplified), English, German

Note:

The IOP cannot be directly snapped onto the CU305 Control Unit. An adapter cable is required for operation.

Note:

The IOP cannot be used for commissioning SINAMICS S120.

Updating the IOP

The IOP can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP ¹⁾.

The IOP is supplied with power via the USB interface during an update.