品牌:西门子
起订:1个
供应:1000个
发货:3天内
信息标签:6SL3055-0AA00-5CA2,供应,电子、电工,工控系统及装备
SMC10 Sensor Module Cabinet-Mounted
The SMC10 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC10.
The following encoder signals can be evaluated:
The SMC10 Sensor Module Cabinet-Mounted features the following connections and interfaces as standard:
The status of the SMC10 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.
The SMC10 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 standard mounting rail in accordance with EN 60715 (IEC 60715).
The signal cable shield is connected via the encoder system connector and can also be connected to the SMC10 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1. The shield connection terminal must not be used for strain relief.
SMC10 Sensor Modules Cabinet-Mounted communicate with a Control Unit via DRIVE-CLiQ.
SMC10 Sensor Module Cabinet‑Mounted 6SL3055-0AA00-5AA3 |
|
---|---|
Power requirement, max. at 24 V DC, |
0.2 A |
|
2.5 mm2 |
|
20 A |
Power loss, max. |
10 W |
Encoders which can be evaluated |
|
|
4.1 V |
|
5 ... 10 kHz depending on the current controller clock cycle of the Motor Module or Power Module |
|
0.5 |
|
2 kHz (120000 rpm) depending on the number of resolver pole pairs and current controller clock cycle of the Motor Module or Power Module |
|
16384 times (14 bits) |
|
130 m |
PE connection |
M4 screw |
Dimensions |
|
|
30 mm |
|
150 mm |
|
111 mm |
Weight, approx. |
0.4 kg |
Approvals, according to |
cULus |