Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat resistance, inherent flame resistance, low surface energy, and exceptional dielectric properties. Hyflon® PFA resins have been designed to retain their properties over a wide range of temperatures from cryogenic to 300°C (572°F) and are the material of choice in applications such as linings in the Chemical Process Industry, Oil and Gas, Specialty Cables, Semiconductor Industry, Aerospace, and other challenging industries.
Hyflon® PFA 125X is a low melt flow rate resin designed for pipe extrusion, where very high viscosity and melt strength are needed. It also has significantly lower permeability to gasses than standard PFAs. Hyflon® PFA P125X is an ASTM D3307 - Type XV resin.

材料状态 

供货地区 

特性 

用途 

机构评级 

形式 

加工方法 

额定值

单位制

测试方法

g/10 min

in^-5/in/°F

g/cm³

额定值

单位制

测试方法

psi

psi

%

psi

额定值

单位制

测试方法

额定值

单位制

测试方法

额定值

单位制

测试方法

°F

°F

Btu·in/hr/ft²/°F

J/g

J/g

额定值

单位制

测试方法

%

PROCESSING
Because PFA is corrosive in the melt, machinery used to process Hyflon® should be lined with corrosion resistant alloys.

HEALTH SAFETY AND ENVIRONMENT
Hyflon® PFA 125X is a very inert polymer and it is not harmful if used and handled according to standard processing procedures.
If handled inappropriately, it may release harmful toxic chemicals. Please refer to the Material Safety Data Sheets for more information on handling and safety.

PACKAGING AND STORAGE
Hyflon® PFA 125X resin is available in 25 kg (55 lbs) and 600 kg (1323 lbs) packaging. Though it has an indefinite shelf life, it is recommended to store it in a clean area, protected from direct sunlight, and possible contamination.

特性 may also be described by the following terms: Semi-Crystalline, 阻燃性能, 低流动性，低熔融性.

用途 may also be described by the following terms: Semiconductor Molding Compounds, 管道系统，管路, 管道，管, Oil Applications, Gas Applications.