DuPont™ Teflon ® FEP 9495 is a melt-processible fluoroplastic resin available in pellet form. It is a copolymer of tetrafluoroethylene and hexafluoropropylene, without additives, that meets the requirements of ASTM D 2116 type II. With a relatively high melt flow rate and excellent electrical properties, Teflon ® FEP 9495 has been specifically designed for high-speed extrusion of thin coatings on small-gauge wires for twisted-pair constructions. Table 1 shows the typical property data for Teflon ® FEP 9495.

As shown in Table 1, this resin provides the electrical and mechanical properties needed for low voltage applications. In addition, Teflon ® FEP 9495 has a higher melt flow rate than most other fluoroplastic resins. This permits higher extrusion speeds and easier processing, making Teflon ® FEP 9495 a cost-effective alternative for producing thin-wall extrusions.

Teflon ® FEP 9495 is designed and made to have improved adhesion to copper wire under specific wireline process conditions, low dissipation factor at high frequencies, and to have significant plate-out resistance in melt extrusion. It is suitable as a solid insulator, and as a foamed insulator when used with an appropriate nucleant in a nitrogen gas injection process.

Teflon ® FEP 9495 is used when traditional extrusion and molding processes are required for producing products with the superior properties of a fluoroplastic resin. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® FEP 9495 can be used to improve processing rates. Compared with other fluoroplastics, creep resistance at high service temperatures provides a superior balance and level of end-use properties. Teflon ® FEP 9495 combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.

Properly processed products made from neat Teflon ® FEP 9495 resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.

In a flame situation, products of Teflon ® FEP 9495 resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.

材料状态 

供货地区 

特性 

用途 

机构评级 

形式 

加工方法 

额定值

单位制

测试方法

g/cm³

g/10 min

g/10 min

%

额定值

单位制

测试方法

psi

%

psi

额定值

单位制

测试方法

额定值

单位制

测试方法

°F

额定值

单位制

测试方法

V/mil

额定值

单位制

测试方法

%

额定值

单位制

测试方法

sec^-1

Cycles

特性 may also be described by the following terms: 良好的耐化学品性，耐化学品性良好, 良好的柔性，柔软的, 低摩擦系数, 韧性良好，不易磨损, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, 良好的耐候性，耐候性的, Good Electrical Properties, Non-sticky, not sticky, non-stick.

用途 may also be described by the following terms: 电线电缆应用，电线电缆用途, 通信电线绝缘材料, Low Voltage Insulation, Thin walled insulation, thin-wall insulation, thin wall insulation.