For inventory control purposes product name may be followed by an X.

Products labeled PFA 451HP and PFA 451HP X are equivalent and all information in this document is applicable to both.

Typical Application
Teflon ® PFA 451HP is preferred in applications where purity in the parts-per-billion range, surface smoothness, and the highest levels of chemical permeation resistance are required; including tubing, unsupported pipe linings for the production of ultra-pure chemicals, semiconductor components, and fluid handling components for high-performance chemical delivery systems where stress-crack resistance is critical.

Description
DuPont™ Teflon ® PFA 451HP is a special purpose fluoroplastic resin available in pellet form. This resin is a chemically modified form of Teflon ® PFA 350 that combines many of the advantages of the parent resin with several additional benefits. Teflon ® PFA 451HP exhibits improved surface smoothness achieved through minimization of spherulite size, enhanced chemical permeation resistance achieved by increasing its crystallinity from Teflon ® PFA 450HP, enhanced purity, and improved thermal stability while processing.

Teflon ® PFA 451HP is a relatively low melt flow rate (typical MFR of 2), premium resin with the lowest level of extractables designed to meet ultra-high purity requirements. An enhanced resistance to environmental stress-cracking and chemical permeation make Teflon ® PFA 451HP a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ® PFA 451HP makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® PFA 451HP can be used to improve processing rates, combining the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.

Properly processed products made from neat Teflon ® PFA 451HP resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.

In a flame situation, products of Teflon ® PFA 451HP resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.

Teflon ® PFA 451HP meets the requirements of ASTM D3307, Type II

材料状态 

供货地区 

特性 

用途 

机构评级 

形式 

加工方法 

额定值

单位制

测试方法

g/10 min

%

额定值

单位制

测试方法

psi

psi

%

%

psi

psi

额定值

单位制

测试方法

额定值

单位制

测试方法

°F

额定值

单位制

测试方法

ohms·cm

V/mil

V/mil

额定值

单位制

测试方法

%

额定值

单位制

测试方法

sec^-1

Cycles

Weather and Chemical Resistance: Outstanding

特性 may also be described by the following terms: 良好的耐化学品性，耐化学品性良好, High Purity, 低流动性，低熔融性, Good Electrical Properties, 良好的熔体强度, 良好的柔性，柔软的, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, 韧性良好，不易磨损, 低摩擦系数, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, 良好的耐候性，耐候性的.

用途 may also be described by the following terms: 管道，管, 管道系统，管路.