品牌:WIFI模块FCCID认证
发货:3天内
信息标签:WIFI模块FCCID认证,供应,认证服务,电子行业认证
办FCC认证有什么好处,为什么需要FCC认证
如果你的产品是出口欧盟的话,那你就必须要办理FCC认证了,好处就是让你有更多的客户,如果你的客户在选择你和另外一个厂家,你有FCC认证而别人没有那人家肯定会选择你的产品呢。
做一单子的业务,交一辈子的朋友!给我一个期待,还你一个惊喜!期待您的来电与回复!
国家CNAS深圳倍测检测实验室 CNAS L6046
FCC认证流程:(详情咨询:QQ:2355957005李小蓉)
以下所列为FCC认证所需之基本技术数据,到时我方工程师将讲解欧盟对于以下数据之格式、内容等之规定,同时会指导贵厂编辑整理这些基本技术数据。
□ 认证申请表
□ 样品二台
□ 规格书
□ 铭牌
□ 电路图
□ 说明书
□ 多个型号差异表
注:以上技术数据需提供中英文版本,图面形式需为标准图面,相关图面所使用之符号需转换为欧规符号.
无线产品申请FCC(ID)认证资料清单
1、 认证申请表(我司提供模板);
2、 1-2个样品;
3、 产品说明书(英文);
1. Download and Installation: First, Find “Kuppy” in the App store, download and install the software on your smart phone.
1. Pairing: Open the blue tooth and Open software“Kuppy”, press , to open the device list, press “+”, then press “Kuppy-S1” for more than 3 seconds until red light is flashing to enter pairing mode. A device name of “Kuppy-S1”will pop up. After the pairing, it will return to the “device list” automatically. Press, now the “Kuppy-S1”will flash in red and bleep. Press “Kuppy-S1”, can make smart phone beeps. Press “OK” to stop beeping. Press for device normal setting. Users can change the names, pictures, volumn,distance and location service function, and delete the connection with this device.
2. Bluetooth shutter camera: Press to open photo/vedio interface. User can set flash light on/off, front/back camera shifting, photo/vedio shifting. In this page, press the button to take photos and record vidoes. For the first use, it will popup a dialog box, press “OK”and open the privacy function of taking photos and all the photos can be saved in the photo album. Press “cancel”to back to the main page.
3. Voice memo : Press to enter voice memo interface. User can record maually or press the button. All the recording will save on your phone. Sound recording support.
4. Check Location: press can check the location information of Kuppy-S1
4、材料清单表(BOM表);
SET-S1 BOM表 |
||||
编号 |
物料名称及规格 |
货品单位 |
用量 |
位置 |
1 |
贴片发光二极管 红色 GB-T0603 KRKT-5A |
pcs |
1 |
D1 |
2 |
贴片电容12.5PF ±2% 50V 0402 J/NP0 |
pcs |
2 |
C14 C15 |
3 |
贴片电容 1UF 0402 16V K/ X7R |
pcs |
1 |
C11 |
4 |
贴片电容 15pF ±2%50V 0402 J/NPO |
pcs |
1 |
C12 |
5 |
贴片电容 2u2F 6.3V 0402 M |
pcs |
1 |
C6 |
6 |
贴片电容 10UF 0603 6.3V,Z/X5R |
pcs |
1 |
C1 |
7 |
贴片电阻 1K OHM 5% 1/16W 0402 |
pcs |
2 |
R3 R10 |
8 |
贴片电阻 470 OHM 5% 1/16W 0402 |
pcs |
1 |
R6 |
9 |
贴片电阻 1M 1% 0402 1/16W 50V |
pcs |
1 |
R9 |
10 |
561电池弹片 1 17.5x9mm 0.15厚 磷铜镀镍 |
pcs |
1 |
+ |
11 |
561电池弹片 2 17x9mm 0.15mm厚 磷铜镀镍 |
pcs |
1 |
- |
12 |
SET-S1 PCB板 四层FR4,板厚0.6mm,沉金,绿油白字直径22.8x12.95mm |
pcs |
1 |
|
13 |
钮扣电池CR2016 |
pcs |
1 |
BAT1 |
14 |
蜂鸣器7.5x7.5x2.5 mm |
pcs |
1 |
M1 |
15 |
轻触开关TC-3114 |
pcs |
1 |
S1 |
16 |
蓝牙天线滤波器LFB18B2450D441518 |
pcs |
1 |
BF1 |
17 |
贴片ICAT24C512,TSSOP8 |
pcs |
1 |
U1 |
18 |
贴片ICSCR1000,QFN32-5*5 |
pcs |
1 |
U2 |
5、 产品电路原理图;
6、PCB板图;
7、方框图;
8、电路原理描述;
1. 3V button cell battery supply power
2. R9 is used for battery testing, through R9’s and CSR1000’s AIO0 interior electric resistance’s partial pressure, the battery voltage will be put into CSR1000’s ADC, then it can measure out the rest battery voltage.
3. Connecting M1 to buzzer, in order to alarm
4. The red LED (D1) is used for show alarm and indication.
5. Y1, C12 and C13 provide 16MHz clock signal to CSR1000, Y2, C14 and C15 provide 32.768 KHz clock signal.
9、料除清单中的之外,还需要补充以下四点:
1. 蓝牙定频操作说明;
2.蓝牙芯片规格书;
3.告知天线增益值是多少dBi;
4. 定频模块。