价格:1.00/台
品牌:EMS
起订:1台
供应:100台
发货:30天内
信息标签:实验室用微波炉Precision Pulsed Laboratory Microwave Oven,供应,仪器仪表,分析仪器

点击这里进行电话呼叫

点击这里QQ咨询

联系时一定要说在【贸易商务资源网】看到的将给您优惠！如果您也想和该公司一样在网站发信息有好排名，点击立即免费注册，发布产品推广。

Features
• Easy operation and maintenance
• Easily adjusted effect % knob
• Accurate temperature control
• Well ventilated chamber
• 3 different timer modes
• Built in air pump for mixing
• Manifold for up to 5 mixing tubes
• Adjustable temperature probe holder
• Stainless steel chamber
• Glass fiber reinforced silicone floor
• Built in reflector for even distribution of microwaves
• On/off rotator switch
For optimum results...
The oven features a very well defined adjustable effect, an accurate temperature control, a well ventilated chamber, and three different timing modes for running the unit.
Our temperature control not only prevents the tissue in the chamber from becoming denatured (by high temperature) but it also assists in pulsing the microwave effect in small precise portions. The temperature control has a direct effect on the magnetron (the microwave generator) as it allows the unit to switch on and off in the most efficient way at the preset effect level.
The set effect is adjustable at any time either before or during a run. This aids in the balance of the microwave load and the content of the microwave absorber. It should be noted that the penetration rate and process times are influenced by the presence of microwave radiation in the chamber and for this reason it is imperative that the effect rate be adjustable at any given time during a run.
Inside the chamber there is a manifold for up to 5 tubes which allows you to achieve bubble mixing in from 1-5 containers at once. There is a built in air pump that facilitates the mixing, avoiding temperature gradients in the mixing process. These adjustable bubble mixers make the EMS-820 ideal for decalcification.
Our oven is so versatile that you have the option to run it in three different modes depending on your application:
1. 3 optional presets programmed by the operator: 5 seconds-99
minutes with or without turntable.
2. Continuous run: indefinite time.
3. Timed run: up to 99 minutes.
The oven chamber is made entirely of stainless steel and it is very easy to clean. It is extremely resistant to all staining solutions that are usually employed in histology and like fields. The floor of the unit, which covers the rotator cavity, is a glass fiber reinforced silicone plate which serves as a thermal insulator and will not absorb microwaves. The plate is totally chemical resistant.
The EMS-820 is designed for easy operation and maintenance. All of the controls can be set with one hand and are easily accessible allowing for changes at any time. An adjustable thermal probe encased in a white "PTFE" holder (a microwave transparent material) comes with the unit. The probe can be set at different heights to accommodate all different types of containers and volumes of liquid. Attached to the probe is an adaptor to hold one of the mixing tubes; this is important because the liquid which is regulated by the thermostat needs to be mixed well to avoid temperature gradients. The probe automatically measures the existing temperature and displays it.
The unit has a built in reflector inside the chamber which evenly distributes the microwaves. A rotator is built into the unit, as well, to prevent "Hot-Spots" from forming even for very small volumes (e.g.; reagent drops on glass slides).
Advantages of the EMS-820 Precision Pulsed Laboratory Microwave Oven
Ease of Use:
When using a laboratory microwave oven, one has to determine the set effect to use depending on the type of sample, temperature, and load. Our unit has the effect control knob easily accessible at all times, and can be changed even during the middle of a run. The effect percentage setting is easy to read at all times.
Continuous Run Mode: For longer procedures (greater than 99 minutes 99 seconds) our unit runs continuously - the timer works in a count up mode for an indefinite period of time. There is no need to shut off the unit and begin again.
Multiple Bubble Mixing:
A 5-port manifold for mixing up to 5 different containers at once.
Stainless Steel Compartment:
Very easy to clean and resistant to staining or scratching. Resistant to all staining solutions.
Adjustable Temperature Probe Holder:
It will accommodate any size container and it is flexible and very easy to align.
Glass Fiber Reinforced Silicone Floor:
It comes standard with the unit and it covers the rotator when it is not in use.
Ventilation:
Our unit has a built in powerful fan which accommodates at least 2 meters of tubing.
Different Timer Options
1. Continuous Run: For long processes requiring more than 99 minutes. (e.g.; decalcification)
2. Timer Controlled Run: For processes less than 1 hour 40 minutes. (e.g.; section staining, fixation, etc.)
3. Short Runs: For very short processes, usually shorter than 6 minutes, without the need for the thermal probe. (e.g.; immunohistochemistry)

Specifications
Magnetron Effect 1000W
Effect Range 0-100%
Temperature Range 25-100°C
Temperature Accuracy +/- 0.5°C within 25-70°C
Temperature Variation +/- 0.4°C at 40°C
Balanced effect with 200 ml H2O load and 200 ml H2O sample
Chamber Evacuation Fan tubing outlet at rear
Timer 5 sec-99min 99sec
Continuous Run Timer override-works as a count up timer for an indefinite period of time
Safety Switch Off At 105°C chamber temperature
Measurements (Inner) 315mm x 315mm x 205mm
Outer Dimensions 550mm x 450mm x 350mm
Pulse length 3 sec.
Microwave reflector Motor-driven metallic field stirrer to eliminate hot spots

97100 EMS-820....Precision Pulsed Laboratory Microwave Oven - 220V, complete with the The Microwave Cookbook for Microscopists by Kok and Boon each