Klüber Summit HySyn FG 100
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Product description
Klüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
Benefits for your application
-
Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
-
ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
-
Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oil-injected screw-type compressors
-
Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materials
-
Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
-
Long service of oils filters, activated carbon filters and oil separators
-
Also suitable for the lubrication of gears due to the high scuffing load capacity
-
Used and approved by Aerzener, Air Liquid, Boge, compare, Worthington, Getriebebau Nord, Lenze etc.
Klüber Summit HySyn FG 68
Fully synthetic compressor oils for the food-processing and pharmaceutical industry
Product description
Klüber Summit HySyn FG oils are air compressor oils based on synthetic hydrocarbon oils. They can be mixed with mineral oils and other synthetic hydrocarbon oils.
Benefits for your application
-
Klüber Summit HySyn FG oils are NSF H1 registered for use in the food-processing and pharmaceutical industry and comply with FDA 21 CFR Sec 178.3570
-
ISO 21469 certified – supports compliance with the hygienic requirements of your production. You will find further information about ISO Standard 21469 on our website www.klueber.com
-
Low maintenance and operating costs due to extended oil change intervals up to 4,000 operating hours in oil-injected screw-type compressors
-
Easy compressor conversion from mineral to the synthetic Klüber Summit HySyn FG oils due to miscibility and compatibility with common seal materials
-
Low tendency to evaporation and thus low impact of the oil vapour on the compressed air
-
Long service of oils filters, activated carbon filters and oil separators
-
Also suitable for the lubrication of gears due to the high scuffing load capacity
-
Used and approved by Aerzener, Air Liquid, Boge, compare, Worthington, Getriebebau Nord, Lenze etc.
