1、框架：采用架式结果设计，框架结构稳定，刚性好；冷却塔运行时的载荷均匀的分布在每一个基础之上，运行平稳。所有结构件均经热浸锌处理，具有良好的防锈防腐性能。 2、玻璃钢件（F.R.P）采用**面胶、不饱和聚脂树脂和玻璃纤维为原材料，配以标准化之模具进行制作，玻璃钢产品表面光滑、色彩均匀、耐老化、不退色，历久犹新。圆形冷却塔价格 清风菱电牌 3、电机采用全封闭冷却塔专用电机，防护等级IP54，密封性能好，适合在湿热的环境中运行，运行噪音低，使用寿命长。 4、风机：选用宽叶片前倾式空间扭曲低转速铝合金轴流式风机，具有转速低、风量大、运行噪音低、动平衡性能好等优点。风机角度可调，可满足客户对风量、噪音等工艺方面的不同需要。 5、减速装置 减速箱采用进口轴承，配以进口三角皮带，使冷却塔减速装置运行平稳，噪音低，使用寿命长。 6、填料：由**改性P.V.C平片经热水加热压缩而成。独特的斜梯型波设计，使填料表面的气流水流分布均匀，热交换性能显着提高；同时还具有抗紫外线、阻燃、耐寒、耐化学腐蚀等优点，圆形冷却塔价格 清风菱电牌 7、转头：采用铝合金材料制作，内装进口轴承，安装精度高，配合紧密，运转平稳，使用寿命长 8、蓄水盆：为大蓄水量和高水位设计，避免开机抽空，保证配套设备运行正常。 1, the framework: the result type design, frame structure stability, good rigidity; load cooling tower operating evenly distributed on each base, running smoothly. All parts are by hot dip galvanizing, rust has good anti-corrosion properties. 2, glass steel (F.R.P) with high quality surface rubber, unsaturated polyester resin and glass fiber as raw material, with production to standardization of mold, glass steel products smooth surface, uniform color, anti-aging, do not fade, unfading.圆形冷却塔价格 清风菱电牌 3, the motor uses the full closed cooling tower special motor, protection grade IP54, good sealing performance, suitable for running in the humid environment, low noise, long service life. 4, fan: the wide blade forward type space warp Aluminum Alloy low speed axial fan has the advantages of low speed, large volume, low noise and good dynamic balance performance etc.. Fan angle can be adjusted to meet customer demand for air, noise and other technical aspects. 5, the speed reducer gearbox imported bearings, with imported triangular belt, so that the cooling tower reducer running smoothly, low noise, long service life. 6, packing: by the high quality modified P.V.C flat film by hot water heating compression. The unique inclined ladder type design makes the surface of the filler surface flow evenly, the heat exchange performance is significantly improved; at the same time, also has the advantages of UV resistance, flame retardant, cold resistance, chemical corrosion resistance, etc., 7, turn the head: the use of aluminum alloy materials, imported bearings, installation of high precision, with tight, stable operation, long service life 8, water storage basin: large storage capacity and high water level design, to avoid the boot time, to ensure that the normal operation of equipment.