Stanyl 46SF5030 PA46荷兰DSM30% Glass Reinforced_供应

Stanyl 46SF5030 PA46荷兰DSM30% Glass Reinforced

发布时间:2017-05-03 09:17:08 产品编号:GY-5-138001443 分享

价格:45.00/KG
品牌:Stanyl
起订:25KG
供应:10000KG
发货:1天内
信息标签:Stanyl 46SF5030 PA46荷兰DSM30% Glass Reinforced,供应,塑料橡胶,塑料原料

点击这里进行电话呼叫

点击这里QQ咨询

联系时一定要说在【贸易商务资源网】看到的将给您优惠！如果您也想和该公司一样在网站发信息有好排名，点击立即免费注册，发布产品推广。

Stanyl® 46SF5030

General

Material Status

Commercial: Active

Literature 1

Processing (English)

Technical Datasheet (English)

UL Yellow Card 2

E47960-100751282

E172082-506872

Search for UL Yellow Card

DSM Engineering Plastics

Stanyl®

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

Filler / Reinforcement

Glass Fiber, 30% Filler by Weight

Additive

Flame Retardant

Heat Stabilizer

Lubricant

Mold Release

Features

Flame Retardant

Good Flow

Heat Stabilized

Lubricated

Platable

Processing Method

Injection Molding

Resin ID (ISO 1043)

PA46-GF30 FR(17)

Physical	Dry	Conditioned	Unit	Test Method
Density	1.68	--	g/cm³	ISO 1183
Molding Shrinkage				ISO 294-4
Across Flow	1.1	--	%
Flow	0.40	--	%
Water Absorption				ISO 62
Saturation, 23°C	5.8	--	%
Equilibrium, 23°C, 50% RH	1.6	--	%
Viscosity Number	66.0	--	cm³/g	ISO 307

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	12000	7500	MPa	ISO 527-2
Tensile Stress (Break)	170	110	MPa	ISO 527-2
Tensile Strain (Break)	1.9	2.8	%	ISO 527-2
Flexural Modulus	11000	6800	MPa	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	12	12	kJ/m²
23°C	13	13	kJ/m²
Charpy Unnotched Impact Strength (23°C)	40	40	kJ/m²	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, Unannealed	290	--	°C	ISO 75-2/B
1.8 MPa, Unannealed	290	--	°C	ISO 75-2/A
Glass Transition Temperature 3	75.0	--	°C	ISO 11357-2
Vicat Softening Temperature	290	--	°C	ISO 306/B50
Melting Temperature 3	295	--	°C	ISO 11357-3
CLTE				ISO 11359-2
Flow	2.0E-5	--	cm/cm/°C
Transverse	4.5E-5	--	cm/cm/°C
RTI Elec (0.35 mm)	65.0	--	°C	UL 746
Effective Thermal Diffusivity	1.01E-7	--	m²/s

Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity	> 1.0E+15	1.0E+10	ohms·cm	IEC 60093
Electric Strength	30	20	kV/mm	IEC 60243-1
Relative Permittivity				IEC 60250
100 Hz	4.30	--
1 MHz	4.00	--
Dissipation Factor				IEC 60250
100 Hz	6.0E-3	--
1 MHz	0.016	--
Comparative Tracking Index	225	--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flammability Classification				IEC 60695-11-10, -20
0.35 mm	V-0	--
1.5 mm	V-0	--

Fill Analysis	Dry	Conditioned	Unit
Melt Density	1.45	--	g/cm³
Melt Thermal Conductivity	0.26	--	W/m/K
Specific Heat Capacity of Melt	1750	--	J/kg/°C

Injection	Dry	Unit
Drying Temperature	80	°C
Drying Time	4.0 to 8.0	hr
Rear Temperature	280 to 310	°C
Middle Temperature	300 to 315	°C
Front Temperature	300 to 315	°C
Nozzle Temperature	300 to 310	°C
Processing (Melt) Temp	310 to 320	°C
Mold Temperature	60 to 120	°C
Injection Rate	Moderate-Fast
Back Pressure	1.00	MPa
Screw Compression Ratio	2.5:1.0

联系方式

公司: 东莞市德祥塑胶原料有限公司
状态:离线发送信件
姓名:罗军(先生)
电话:13420037086
手机:13420037086
传真:18926865251
地区:广东-东莞市
地址:东莞市虎门镇南栅第六工业区民昌路13号2-3号铺

QQ:363743799
商铺:http://m.ceoie.com/linfeng1990/

去东莞市德祥塑胶原料有限公司怎么走？上图中的红点是东莞市德祥塑胶原料有限公司在东莞市的具体位置标注，操作左上角地图工具可以放大缩小哦。

点击分享到微信、朋友圈、QQ...