价格:未填
品牌:永君物资
起订:1
供应:452345
发货:1天内
信息标签:普碳板场地租赁电话多少,供应,便民服务,房屋交易

点击这里进行电话呼叫

点击这里QQ咨询

联系时一定要说在【贸易商务资源网】看到的将给您优惠！如果您也想和该公司一样在网站发信息有好排名，点击立即免费注册，发布产品推广。

钢结构厂房合适高度是多少？
What is the proper height of the steel structure workshop?
１、这个根据施工工艺和个人要求来，如果车间里没有行车或许比较高的工艺设备，一般做到４－７米，如果车间里要求有行车的话，一般都会在９米以上，有的重钢车间能够做到３０多米。
1, according to the construction technology and personal requirements, if there is no train in the workshop or more high technical equipment, it is generally 4-7 meters. If the workshop is required to drive, it will generally be more than 9 meters, and some heavy steel workshop can be more than 30 meters.
２、钢结构厂房建二层，适合轻工业厂房。楼面荷载一般较大，底层的跨度不宜大于９米；为了生产工艺流水线设备安置，跨度也不宜小于６米；屋面的跨度不宜太小，尽可能做到两坡，外排雨水便利而又不阻碍生产工艺，能够是厂房的总宽（用屋架），也能够把跨度对齐底层（用梁，柱）。
2, steel structure workshop built two layers, suitable for light industrial workshop. The floor load is generally large, the bottom span should not be more than 9 meters. In order to produce the production line equipment, the span should not be less than 6 meters; the span of the roof should not be too small, as far as possible two slopes, the outer row of rainwater is convenient but does not hinder the production process, it can be the total width of the plant (using the roof frame), and can also span the span. Align the bottom (with a beam, a column).
单层厂房的高度是指什么？
What is the height of a single storey factory?
１、厂房的规范高度一般是５～６米，大部分厂房是这个高度，如果是单层钢结构厂房就必须６米以上了，制曲车间包含质料室、破坏室、润料场、踩曲场、大曲培育室和干曲房（曲库），应安置流水作业线。曲房结构一般选用土木结构，人字架房顶。
1, the standard height of the factory is generally 5~6 meters, most of the workshop is this height, if it is a single layer steel structure workshop, it must be more than 6 meters, and the workshops are composed of material room, destruction room, moistening yard, trample field, Daqu cultivation room and dry curved room (Qu Library). The structure of a curved house usually adopts a civil structure, a roof of a herringbone shelf.
２、一般选用坐北朝南，曲室檐高一般为３．５～４ｍ，长８米，宽８米，面积６０平方米左右。曲房前后开设窗户，窗高１．１ｍ左右恰当设置排气窗，通常设两层门。
2, generally choose to face south, the height of the winding eaves is generally 3.5 to 4m, 8 meters long and 8 meters wide, with an area of 60 square meters. A window is set up before and after the building. The window is about 1.1m high and the exhaust window is set properly. There are usually two doors.
３、制酒车间要求场所平整、宽敞、坚固、易于排水和清洗。车间内应设置质料堆积场、酒甑、晾场、发酵池若干。水泥框架结构较多，房高度好要高６ｍ左右（要考虑天车抓斗运送醅料进、出窖）跨度１２ｍ；室内通风要好；酒甑房顶上一定要开设排气窗。
3, the liquor making workshop requires the site to be smooth, spacious, strong, easy to drain and clean. There should be material accumulation yard, retort, airfield and fermentation tank in the workshop. The structure of the cement frame is more, the height of the room is about 6m high (to take into account the 12m of the fermented grains and the cellar), and the indoor ventilation is better, and the exhaust window must be opened on the roof of the wine steamer.
４、单层厂房的高度是指厂房室内地坪到房顶承重结构下外表之间的距离。由于房顶承重结构是歪斜的，其核算点应算到房顶承重结构的低点，所以在一般情况下，咱们常以柱顶标高来衡量厂房的高度。
4. The height of the single storey factory building refers to the distance between the interior of the workshop and the appearance of the roof bearing structure. Because the roof bearing structure is skew, its accounting point should be calculated to the low point of the roof bearing structure, so in general, we often measure the height of the building with the top of the column.
  济南永君物资有限责任公司经过近二十年的开拓，目前钢材销往全国十七个省市,拥有固定客户5000多家，年吞吐量20余万吨；煤炭、焦碳、石油、铁矿粉等各类钢铁原料及半成品的营销量每年近20余万吨，经营额10亿元人民币。
  济南永君物资有限责任公司现有员工150余人，技术管理人员40余人。雄厚的专业人才，高素质的员工队伍，1997-2003年连续7年被省市工商局评为“山东百强**私营企业”，2002年全国民营百强企业第79名，荣获济南市工商行政管理局的“优秀市场”称号，1999-2004年历城区纳税贡献大户，**私营企业。1998-2004年连续被中国农业银行评为3A级信用企业和重合同守信用企业，并被评为济南市工联商2001-2004年度优秀会员单位。
济南永君物资有限责任公司
联系人: 杨经理 13589138999 
销售电话：0531-88692325 
公司邮箱：sdyjgcsc@163.com
公司地址：济南市工业北路75-9号永君钢材市场
公司网址 :http://www.jnyjgt.com/
鲁商云:http://www.lushangyun.com/
诺商商道系统，-专业互联网应用服务提供商：www.chinanovo.net
济南诺商信息网站：www.cn-un.net
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网**！