日本KETT品牌LZ-200J统计打印手提型膜厚计 兼备电磁式与涡电流式功能，而且是内藏打印机的便携式膜厚计。可迅速对应磁性金属上及非磁性金属上的各式各样被膜厚度之测量。

具备统计计算功能，按下操作键即可求出平均值、标准偏差、-大值、-小值。

校正、记忆功能、上下限设定功能等一应俱全。

日本KETT 统计打印手提型膜厚计 LZ-200J
 
测量方式
 涡磁两用式
 
测量对象
 磁性金属上非磁性被膜及非磁性金属上绝缘被膜
 
测量范围
 磁：0~1500μm
涡：0~800μm
 
测量精度
 磁：15μm以下±0.3μm；15μm以上±2%
涡：50μm以下±1μm；50μm以上±3%
 
分辨率
 100μm以下：0.1μm；100μm以上：1μm
 
显示方式
 LCD数位荧幕显示
61(D)x29(H)mm
 
-小测量面积
 5x5mm
 
校正记忆功能
 8组，任何时间开机不需重新校正
 
界限值
功能
 可任意设定上、下限判别功能，超过范围时以音响警示
 
资料记
忆数
 3000点
 
统计功能
 测量次数、平均值、-大值、-小值、标准差值
 
测量功能
 单点测试、连续扫瞄测试，可测试膜厚分布变化
 
打印机
 24 character内藏感热式打印机，自动统计记录，纸宽58mm
 
电　源
 AC110V/60Hz或主机单3号电池x6，打印机单3电池x4
 
尺 　寸
 120(W)x250(D)x55(H)mm
 
重　量
 约1.1kg
 
测量方式
 内藏测头单点测试
 
测量单位
 公、英制可任意切换（μm/mils）
 
附 属 品
 铁素材、校正用标准片、电池、携带套、操作说明书、曲面固定器、测头、AC插头
 
 
 

Dual-Type Coating Thickness Tester LZ-200J

The LZ-200J is a portable coating thickness tester equipped with electromagnetic and eddy-current testing methods and an internal printer. This unit can quickly and easily handle coating thickness measurements of various types of coatings on iron and steel of non-ferrous substrates. Plus, this unit is equipped with many valuable functions such as calibration, memory, limit setup, and a statistical calculation function that, at the press of a button, allows you to find the average value, standard deviation, and largest and smallest values measured.         Specifications LZ-200J Measurement Method Electromagnetic induction/Eddy-current Applications Non-magnetic coating on iron and steel (ferrous) substrates and Insulating coatings on non-ferrous substrates Measurement Range Electromagnetic: 0-1500µm or 60.00mils Eddy-current: 0-800µm or 32.00mils Measurement Precision Electromagnetic: Under 15µm: ±0.3mm, 15µm or greater: ±2% Eddy-current: Under 50µm: ±1µm, 50µm or greater: ±3% Resolution 0.1µm (less than 100µm), 1.0µm (100µm or greater) Statistical Functions Number of measurements, Average value, Standard deviation, Maximum value, Minimum value, Block numbers Probe One-point contact fixed pressure (LEP-J, LHP-J) Display Format Digital (LCD, smallest displayed unit 0.1mm) Output RS-232C interface (transmission speed-2400bps) Power Source AC100V (50/60Hz) or 1.5 ("AA" size Alkaline batteries) x 6 (main unit), Printer ("AA" size Alkaline batteries) x 4 Dimensions & Weight 120(W)x250(D)x55(H)mm, 1.0kg Shipment 2.5kg Accessories Calibration plate, Iron substrate, Batteries (1.5V, "AA" size Alkaline), Probe adapter, AC adapter, Printer paper, Carrying case Options Data Management Software "McWave Series" and "MultiProp" (McWave Series and MultiProp are products of CEC Co.)