Tulsion®T-52H 特别适用于水处理，并且适合于在广泛的PH范围和高温条件下工作。

典型特性（TYPICAL CHARACTERISTICS）： Tulsion®  T-52 H

型式/Type  强酸性阳离子交换树脂/Strong acid cation exchange resin

主体结构/Matrix structure  交联共聚物/Cross1inked copolymer

官能基/Functional grou  核子磺酸基/Nuclear sulphonic

物理型式/Physical form  琥珀色球状/Amber colored moist beads

离子型式/Ionic form  氢/Hydrogen

粒径分布/Particle size distributio  0.3 to 1.2

均粒系数/Uniformity Coefficient  1.7 max

总交换量/Total exchange capacity  1.9 meq/ml (min)

湿度/Moisture content  48±3%

反洗调节密度/Backwash settled density  830 to 860 g/ lit

允许温度/Temperature Stability  120℃

PH范围/PH range  0 - 14

溶解性/Solubility  不溶/Insoluble in all common solvent

操作条件特性（TYPICAL OPERATING CONDITIONSTulsion®  T-5201 H  

**操作温度/ Max Operating temperature  120℃

in bed depth  600 mm

**流速/Maximum service flow  120 m³/hr/m³

逆洗膨胀空间/Backwash expansio  ace  40 - 75%  

逆洗流速/Backwash flow  9 - 20 m³/hr/m³

再生剂/Regenerant  HCl/ H2SO4 for H+型/ NaCl for Na+型

再生程度/Regenerantion level  H+型：30 - 60 g HCl/l，40 - 250 g/l H2SO4  

 Na+型： 60 - 160 NaCl g/l

再生剂浓度/Regenerant concentratio  3-4% HCl，1.5-5% H2SO4，10-15% NaCl

再生流速/Regenerant flow rate  2- 16 m³/hr/m³

再生时间/Regenerant time  20- 60 min

冲洗流速/Rinse flow rate：慢/Slow  再生流速/At regeneration flow rate

 快/Fast  工作流速

冲洗量/Rinse Volume  3- 5 m³/m³

 测试（TESTING）：  Tulsion®  T-5201 H

 离子交换树脂的抽样和测试是按标准的测试程序，即ASTMD - 2187和IS - 7330，1998.

 包装（PACKING）：  Tulsion®  T-5201 H

 For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.

 For further information, please contact:：