橡胶塑料电压击穿试验机主要技术参数：

1、输入电压：    AC 220V

2、输出电压AC：  0～50KV；DC：0～30KV

3、输出功率：    5KVA

4、测量范围：    0KV～50KV

5、电压测量误差：≤ 2％

6、升压速率：    0.1kV/s ～10 kV/s

7、耐压试验电压：10～50KV连续可调

8、耐压时间：    0～4H（无电流导通情况下）

9、电源：        220V±10%的单相交流电压和50Hz±1%的频率

10、电源电压稳定度外界电源电压波动≤10%

11、长×宽×高700mm×800mm×1650mm

12、设备自重：    100kg

13、运行环境温度：15 ～ 30℃，相对湿度：30%～85%能够稳定运行。

14、接地要求仪器需要单独接地，接地附合国家标准要求

15、接地电阻要求≤4Ω（用户实验室自行准备）

橡胶塑料电压击穿试验机主要配置：

1、主机         一台

2、试验台       一个

3、油盒         一个

4、试验电极     三个

5、自动装置 一套

6、试验软件     一套

7、计算机       一台

8、喷墨打印机   一台

9、电源线数据线 一套

 breakdown voltage tester

Nine level security measures:

Super pressure

Test flow

Regulator reset switch

The test box door safety switch

Automatic discharge (with manual discharging device)

The leakage switch

The short circuit test

The independent grounding

9 safety net

Product description of power frequency 50kV breakdown voltage tester:

Meet GB1408.1-2006 "electrical strength test method for insulation materials first parts; power frequency test," GB/T1695-2005 "" "ASTM" GB/T "testing method for measuring the power frequency breakdown voltage of 3333-1999", "GB/T", "12656-1990", "the method of measuring the power frequency breakdown voltage of capacitors", "GB/T1981" and "D149".

Mainly used in solid insulation materials such as: plastic film, resin, mica, ceramic, glass, insulating oil, insulating paint, cardboard and other media in the power frequency voltage or DC voltage breakdown strength and voltage time testing; voltage breakdown tester using computer control, test process can be observed on line data, automatic storage test conditions and test results and other data, and can access, display, print.

Test method for power frequency 50kV breakdown voltage tester:

1, insulation test of air in the air breakdown or pressure test

2, insulation breakdown or compressive specimen immersed in test

3, insulation test of the air in the air of the ladder breakdown or pressure test

The 4 step, the insulation breakdown or compressive specimen immersed in test

Note: according to user requirements, can be customized to other test methods

Power frequency 50kV breakdown voltage tester test software:

1, this instrument can be used in the process of test to draw real-time curve, each test of the boost curve is made of different colors, the test data after the end of the experiment can be superimposed on the experimental data repeatability.

2, can obtain the current and historical test data to view, edit and modify the parameters.

3. The test conditions and the storage path and automatic storage test results can be modified at any time in the process of testing.

4, the test process, the software can be determined at any time by the test is effective, easy to screen test results.

5, can set up the operation password, do the special plane to operate, to avoid the error of the operator.

Main technical parameters of power frequency 50kV breakdown voltage tester:

1, input voltage: 220V AC

2, output voltage AC: 0 ~ DC:0; 50KV ~ 30KV

3, output power: 5KVA

4, measurement range: 0KV ~ 50KV

5, voltage measurement error: less than 2%

6, boost rate: 0.1kV/s ~ 10 kV/s

7, voltage test voltage: 10 ~ 50KV continuously adjustable

8, pressure time: 0 ~ 4H (no current conduction case)

9, power: 220V + 10% single-phase AC voltage and 50Hz + 1% frequency

10, the power supply voltage stability of the external power supply voltage fluctuation is less than or equal to 10%

11, long x x x x x 1650mm x 800mm x 700mm

12, equipment weight: 100kg

13, operating environment temperature: 15 ~ 30, relative humidity: 30% ~ 85% can be stable operation.

14, grounding requires that the instrument need to be alone, then the ground attached to the national standard requirements

15, grounding resistance less than 4 ohm (user laboratory preparation)

Main configuration of power frequency 50kV breakdown voltage tester:

1, host a

2, test rig

3, oil box a

4, test electrode three

5, automatic device

6, test software

7, a computer

8, inkjet printer

9, power line data set