击穿电压(V)：用连续均匀升压的办法对试样施加工频耐电压并保持试样发生击穿时的电压值，以kV表示。

击穿测电压测试仪满足标准：

GB/T 1408-2006 绝缘材料电气强度试验方法

GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验 

GB/T3333 电缆纸工频电压击穿试验方法 

HG/T 3330绝缘漆漆膜击穿强度测定法 

GB12656 电容器纸工频电压击穿试验方法

ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.

击穿电压测试仪试验方式：

1、绝缘试样空气中击穿或耐压试验

2、绝缘试样浸油中击穿或耐压试验

3、绝缘试样空气中阶梯击穿或耐压试验

4、绝缘试样浸油中阶梯击穿或耐压试验

注：根据用户要求，可定制其他试验方式

       BDJC-10KV

       BDJC-20KV

       BDJC-50KV

       BDJC-100KV

       BDJC-150KV

Meet the standard:

The breakdown voltage of instrument according to the following criteria in part of the requirements of manufacturing

GB/T 1408-2006 insulation dielectric strength test method

GB/T1695-2005 rubber breakdown strength and power frequency voltage withstand voltage strength test

GB/T3333 cable ZhiGong frequency voltage breakdown test method

HG/T 3330 insulating varnish film breakdown strength measurement

GB12656 ZhiGong frequency capacitor voltage breakdown test method

ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test method.

USES:

This machine adopts the vertical enclosure structure, greatly saves the experiment indoor space, the anchor structure of pulley, convenient movement and put, avoid similar horizontal equipment manufacturer production, put the case of need to match the mounting plate, covers an area of space is large, it is not convenient to move.

Is mainly suitable for solid insulating material such as plastic, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium under power frequency voltage or dc voltage breakdown strength and time of withstand voltage test; Breakdown voltage tester adopt computer control, test process can be online observation test curve; Automatic storage test conditions and test results and other data, and can access, display and print.

Technical requirements:

01, input voltage: 220 v

02, output voltage: communication 0, 50 KV;

03, electric capacity: 5 kva

04, high-pressure sizing: 0-5 kv; 0 to 10 kv; 0-20 kv; 0-50 kv;

05, pressure rise rate: 10-5000 - V/S (can be set according to user requirements different pressure rise rate)

06, method of test: dc test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

Communication test: 1, 2, gradient booster 3 uniform booster, withstand voltage test

07, installation, high sensitivity of over current protection device to ensure the sample breakdown within 0.1 S when cut off power supply

08, USES the advanced non-contact original uniform pressure regulating methods.

09, support the short circuit test requirements within a short period of time.

10, electrode size: 25 mm ￠two sheet electrode ￠75 mm one (according to customer demand production)

11, the size of the host: width 900 * 800 * 1500 mm high

12, work station size: width 900 * 700 * 1500 mm high

13, cover material: blue organic glass

14 and tank size: width 100 * 80 * 80

15, equipment, weight: 100 kg

Safety instructions:

1, the protection of the equipment to install a separate ground. Protection earthed, mainly is to reduce the sample breakdown when the strong electromagnetic interference on around. Also can avoid the control computer is out of control.

2, dc discharge test alarm function: when the dc test equipment to finish, when open the test device will automatically alarm, until the use of the discharge device on the equipment after discharge alarm will be automatically cancelled. (note: because the dc test after discharge will be dangerous to personal safety, can not directly take electrode, a reminder to use personnel discharge so as not to cause personal injury).

3, test discharge device, with the integration to the host, improve the function with separate ever put a pole.

4, the circuit is equipped with multiple protection measures of the test equipment, mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc test discharge alarm, etc.

5 and 9 level safety protection measures:

(1) the overpressure protection

(2) test over-current protection

(3) voltage regulator reset switch

(4) test the door safety switch

(5) automatic discharge protection (with manual discharging device)

6. The leakage protection switch

All landowners test short circuit protection

Was independent grounding protection

Pet-name ruby security fence protection

Test software:

1, the instrument in the test process for booster breakdown process real-time curve drawing, each test the pressure curve are composed of different colors, the end of the test can be superimposed contrast material test data repeatability.

2, can at any time to view the current and historical test data to be obtained, edit and modify parameters.

3, test can be modified at any time during the process of test conditions and storage paths and automatic storage test results.

4, during the trial, may at any time through the software to determine whether the test effectively, convenient screening test results.

5, can set a password operation, do the special personnel operation, to avoid irrelevant personnel wrong operation.

Test way

1, insulation sample breakdown or pressure test in the air

2, insulation breakdown or pressure test sample oiled

3, breakdown or insulation ladder sample air pressure test

4, insulation breakdown or pressure test sample in the oiled ladder

Note: according to user requirements, can be customized to other test way

Conventional models:

BDJC - 10 kv

BDJC - 20 kv

BDJC - 50 kv

BDJC - 100 kv

BDJC - 150 kv

Note:

1, instrument installation should be independent grounding line.

2, in front of the boot, the operator should be familiar with the operation method in the first place.

3, instrument cannot be in a strong corrosive gas and particle impurity gas environment.

4, test environment temperature between 15 to 25 degrees, relative humidity between 60% and 70%

5, sample spark breakdown moment accompanied by sound, belongs to the normal phenomenon.

6, each replacement sample or contact electrodes must be used when high pressure discharge rod for high voltage electrode discharge, discharge time more than 5 seconds.

7, before each test, must check instrument grounding.

Main configuration:

1, test host

A 2, 50000 fu high pressure generator

A set of 3, automatic microcomputer voltage regulating device (serial)

4, test electrode specification (copper)

5, test oil box a: materials for organic glass

6, the electromagnetic automatic discharge device.

7, voltage breakdown a set of computer measurement and control software

8, computer a (special strong resistance to interference computer)

9, color ink jet printer a brand (HP)

10, national level measurement appraisal quality inspection

11 a, product specification

12, a certificate of approval

Related products:

BDJC - 50 kv series of dielectric breakdown strength tester/dielectric breakdown strength tester

BEST - 121 is a kind of insulating material volume resistivity and surface resistivity tester

GDAT - C series of dielectric constant dielectric loss tester

M - 200 series of plastic sliding friction and wear tester

BDH - 20 series of arc resistance tester/high voltage low current tester

BLD - 600 series of tracking tester/high pressure tracking testing machine

BRS - 3 series of horizontal vertical burning test instrument/glow wire tester/needle flame test instrument

Warranty:

1, two years warranty, life-long after-sales service, for the damaged parts free replacement, within one year warranty period after receiving user to invite, response time is 2 hours at the latest, after confirm with user fault, our company will send engineers arrived on the scene within 48 hours of free services, find out the reason of this fault location and fault as soon as possible and timely report to the users of the cause of the failure and exclusion methods.

2, the warranty period (processed) artificially damaged parts according to the purchasing price charge for replacement.

3, continue to provide users with high-quality technical services, beyond the guarantee period in within 3 days after receiving the user maintenance invited maintenance engineers to the user's site. And enjoys preferential purchase spare parts.

4, sensors and the overload circuit overpressure damage is beyond the scope of the warranty.