Product description

Klüberoil GEM 1 N is a high-performance gear and multipurpose oil based on selected mineral oils satisfying the growing requirements and increasing power density of modern gears. Klüberoil GEM 1 N includes KlüberComp Lube Technology*, i.e. it is based on especially high-grade raw materials and advanced additives, enabling maximum performance in the lubrication of all gear components.

Klüberoil GEM 1 N clearly exceeds CLP requirements according to DIN 51517-3. Corresponding gears can be switched to Klüberoil GEM 1 N without prior consultation with the gear manufacturer provided the general application notes are observed.

Klüberoil GEM 1 N offers high scuffing load capacity of API GL4 if ISO VG 150 or higher is selected. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The excellent wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs. The oil's high micropitting resistance of GFT ≥ 10 according to FVA 54/7 offers sufficient protection to gears that are subject to high loads and would normally be susceptible to this type of damage.

Klüberoil GEM 1 N offers a much longer service life than mineral oil-based standard gear oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Freudenberg seals made of 72 NBR 902, 75 FKM 585, 75 FKM 260466 and 75 FKM 170055 are resistant to Klüberoil GEM 1 N. Leakage and oil contamination are prevented.

Klüberoil GEM 1 N is approved by Siemens-Flender, Siemens Geared Motors, FLSmidth MAAG Gears, SEW Eurodrive, Getriebebau Nord, Lenze Gears, Stöber Antriebstechnik, ZAE Antriebssysteme, Moventas, Bonfiglioli, etc.

By using Klüberoil GEM 1 N you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.

* For further information, please see our flyer: KlüberComp Lube Technology – Gear oils meeting the highest requirements

Benefits for your application

• High scuffing protection

• Excellent wear protection for gears and rolling bearings

• Good shear stability for reliable lubricant film formation

• High micropitting resistance

• Excellent ageing and oxidation resistance

• Low foaming tendency

• Good elastomer compatibility

• Approvals by numerous gear OEMs

Product description

Benefits for your application

• Reliable operation over a wide service temperature range

• Excellent corrosion protection when subject to saltwater

• For lifetime lubrication

Product description

Klüberfood NH1 C 4-58 is based on synthetic hydrocarbons.

Minimal lubrication is achieved if the lubricant is applied/metered in such a way that no droplets of oil are formed on the conveyor chain surfaces.

Klüberfood NH1 C 4-58 offers excellent oxidation stability and low-temperature behaviour. Reduces friction and wear and ensures smooth running of chains.

Klüberfood NH1 C 4-58 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 C 4-58 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Pumpable through central lubrication systems => reduction of operating costs

• Consistent manufacture of goods due to precise lubricant metering avoiding contamination

• Minimal lubrication: clear reduction of bacteriological contamination and corrosion, safer work environment (dry floors), reduction of waste water

Product description

Klüberfood NH1 94-402 is a special lubricating grease composed of a highly refined base oil and a calcium complex thickener.

The use of Klüberfood NH1 94-402, an NSF H1-registered lubricant, can contribute to a safe product regime when used in accordance with food manufacturing regulations.

Klüberfood NH1 94-402 is NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-402 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Increased component availability and extended maintenance intervals

  • owing to its good load-carrying capacity

  • due to good corrosion protection

• Reduces friction and wear, e.g. in rolling bearings, owing to its good wear protection properties and good flow characteristics.

• ISO 21469 certified- supports the compliance with hygienic requirements in your production plant. You will find further information on ISO standard 21469 on our website 

Product description

As a food producer or manufacturer of machines used in the food processing industry, you have to take care of many aspects: from machine reliability to compliance with regulations, from simplification of maintenance processes to cost savings. With Klüberfood NH1 74-401, developed for incidental food contact in food and pharmaceutical processing, we combine the high performance and load-carrying capacity of a synthetic base oil with the versatility of an innovative polyurea thickener. Therefore Klüberfood NH1 74-401 is suitable for long lubrication intervals in a large variety of applications. Furthermore, this high-temperature grease offers you a wide service temperature range and can be applied in rolling bearings up to 160 °C, and up to 180 °C (short term) with appropriate relubrication intervals.

Klüberfood NH1 74-401 is NSF H1-registered and complies with FDA 21 CFR § 178.3570.

Benefits for your application

• Simplification: reduced number of products

  • due to the suitability for many applications

  • due to the wide temperature range

  • due to the suitability for both manual and centralised lubrication systems

• Cost saving and production reliability

  • due to the prolonged service intervals also at medium/high temperature

  • due to the good load-carrying capacity

• Full compliance with the higher food safety standards

  • due to the NSF H1 registration and ISO 21469 certification

  • due to the high performance enabling lower lubricant quantities in the production process

• Risk management improvement

  • due to the lower number of operator lubrication tasks

Product description

Klüberfood NH1 64-422 is a special lubricating grease composed of a synthetic base oil and silicate thickener. This special NSF H1 registered grease has been designed for the lubrication of rolling bearings under the varying operating conditions of the food-processing industry.

Klüberfood NH1 64-422 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 64-422 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Good wear protection and component life resulting from high base oil viscosity

• Good sealing protection of bearing to prevent ingress of moisture and enhancing reliability

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 6-180 / NH1 6-10 is a ready to use, stable aqueous solution of special synthetic fluid with lubricating and sliding properties for applications in the food processing industry, especially in the confectionery industry.

Klüberfood NH1 6-180 / NH1 6-10 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The oil was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 6-180 / NH1 6-10 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• A contributor to reduced wear and component costs resulting from good penetrative and corrosion protection properties

• Potential reduction in contamination levels with a greater resistance to sugar build up

• Supporting productivity when used in the deep drawing of aluminium bottle caps due to good separating properties

• NSF H1 registered supporting process reliability

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 6-180 / NH1 6-10 is a ready to use, stable aqueous solution of special synthetic fluid with lubricating and sliding properties for applications in the food processing industry, especially in the confectionery industry.

Klüberfood NH1 6-180 / NH1 6-10 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The oil was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 6-180 / NH1 6-10 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• A contributor to reduced wear and component costs resulting from good penetrative and corrosion protection properties

• Potential reduction in contamination levels with a greater resistance to sugar build up

• Supporting productivity when used in the deep drawing of aluminium bottle caps due to good separating properties

• NSF H1 registered supporting process reliability

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 4-002 is a spray with special oils which are neutral in odour and taste.

The use of Klüberfood NH1 4-002 is a contributor towards the supporting of food safety. This needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely.

Klüberfood NH1 4-002 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 4-002 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Good penetrating properties and water displacement

• NSF H1 registered supporting process reliability

Product description

As a manufacturer or operator of feed pellet presses, you are likely to prefer a versatile lubricating grease which can be applied to various friction points, facilitating your work processes in initial and relubrication and also preventing mix-up.

Klüberfood NH1 34-401 is a synthetic grease based on a special calcium complex thickener. It is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.

The use of Klüberfood NH1 34-401 can contribute to increased reliability of your production equipment and processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Klüberfood NH1 34-401 offers very good adhesion and resistance to water, besides a very low friction torque, which contributes to smooth operation of the bearings, even during start-up. All these effects help reduce your maintenance expenses.

Benefits for your application

• Considerable cost savings through

  • lower lubricant consumption, even when exposed to high loads

  • attractive price-performance ratio

  • reduction of number of lubricants due to wide range of possible applications

• Longer component life due to good load-carrying capacity and good resistance to wear

• Low breakaway torque even after longer periods of standstill ("Monday-morning effect")

• Easy and convenient application via centralised lubrication systems

Product description

Klüberfood NH1 14-261 is composed of a highly refined base oil and a special aluminium complex soap thickener. Excellent flow characteristics ensure the lubrication points are reliably supplied with lubricant.

Klüberfood NH1 14-261 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 14-261 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Reduced wear due to the excellent load-carrying capacity

• Very good flow characteristics ensure the lubrication point, also in roller bearings, is reliably supplied with lubricant and extend the component life

• NSF H1 registered supporting process reliability

Product description

Klüberfood NH1 14-222 Spray was developed to meet the special requirements of the food-processing and pharmaceutical industries.

Klüberfood NH1 14-222 Spray is a speciality grease based on a synthetic hydrocarbon oil and an aluminium complex soap.

Klüberfood NH1 14-222 Spray is NSF H1 registered and was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 14-222 Spray can contribute to increase safety of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Fully synthetic grease for long relubrication intervals

• Easy spray application

• Facilitates product streamlining owing to its wide range of applications

• Offers improved surface protection through good water resistance

• NSF H1-registered increasing process reliability