Product description

Klüberlub BVH 71-461 is a special lubricating grease based on mineral oil/synthetic hydrocarbon oil/polyurea. It has a wide service temperature range and is suitable for rolling bearings up to a service temperature of 160 °C.

Klüberlub BVH 71-461 ensures excellent wear protection, and its EP additives provide a high pressure absorption capacity.

It is very adhesive and resistant to water under static and dynamic loads.

Klüberlub BVH 71-461 is also particularly resistant to oxidation and ageing and reliably protects against corrosion. It has an especially high sealing effect in coke oven valves.

Benefits for your application

• Lubricating grease for extreme requirements

• Efficient at increased temperatures, vibrations and shock loads

• Resistant to ageing and oxidation

• Good protection against wear

• Good anticorrosion properties

• High pressure absorption capacity

• Resistant to aggressive media

• Good sealing effect

• Has proven effective in coke oven gas valves

Product description

Klüberfood NH1 CH 2-220 Spray is a synthetic high-temperature chain oil. It contains additives which provide very good wear protection. Moreover, the oil shows a low tendency to evaporation even at high temperatures.

Klüberfood NH1 CH 2-220 Spray is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 CH 2-220 Spray can contribute to increase reliability of your production processes. Nevertheless it is recommended to conduct an additional risk analysis, e.g. HACCP.

Benefits for your application

• Extended chain life through enhanced wear protection

• Low oil consumption due to the low tendency to evaporation of the ester oil used

• NSF H1-registered for increased process reliability

Product description

Klüberfood NH1 C 6-150 is a special synthetic high-temperature oil on a polyglycol base developed for the lubrication of chains operating through can and tin-plate curing, lacquering and decorating ovens. Its formulation incorporating a special additive package enables significant friction reduction and good protection against wear and fretting corrosion particularly in the highly stressed pin / bush areas.

Klüberfood NH1 C 6-150 has a good viscosity-temperature behaviour resulting in lowest oil losses and good wear protection when permanently exposed to high temperature influences.

Klüberfood NH1 C 6-150 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 C 6-150 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• A contributor towards cleaner chains resulting from low residue formation

• NSF H1 supporting process reliability

• Good wear protection as demonstrated from customer trials where we increased chain life more than 3 times. Potential extension in chain life subject to application.

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 C 4-58 is based on synthetic hydrocarbons.

Minimal lubrication is achieved if the lubricant is applied/metered in such a way that no droplets of oil are formed on the conveyor chain surfaces.

Klüberfood NH1 C 4-58 offers excellent oxidation stability and low-temperature behaviour. Reduces friction and wear and ensures smooth running of chains.

Klüberfood NH1 C 4-58 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 C 4-58 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Pumpable through central lubrication systems => reduction of operating costs

• Consistent manufacture of goods due to precise lubricant metering avoiding contamination

• Minimal lubrication: clear reduction of bacteriological contamination and corrosion, safer work environment (dry floors), reduction of waste water

Product description

Klüberfood NH1 94-402 is a special lubricating grease composed of a highly refined base oil and a calcium complex thickener.

The use of Klüberfood NH1 94-402, an NSF H1-registered lubricant, can contribute to a safe product regime when used in accordance with food manufacturing regulations.

Klüberfood NH1 94-402 is NSF H1 registered and therefore comply with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 94-402 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Increased component availability and extended maintenance intervals

  • owing to its good load-carrying capacity

  • due to good corrosion protection

• Reduces friction and wear, e.g. in rolling bearings, owing to its good wear protection properties and good flow characteristics.

• ISO 21469 certified- supports the compliance with hygienic requirements in your production plant. You will find further information on ISO standard 21469 on our website 

Product description

As a food producer or manufacturer of machines used in the food processing industry, you have to take care of many aspects: from machine reliability to compliance with regulations, from simplification of maintenance processes to cost savings. With Klüberfood NH1 74-401, developed for incidental food contact in food and pharmaceutical processing, we combine the high performance and load-carrying capacity of a synthetic base oil with the versatility of an innovative polyurea thickener. Therefore Klüberfood NH1 74-401 is suitable for long lubrication intervals in a large variety of applications. Furthermore, this high-temperature grease offers you a wide service temperature range and can be applied in rolling bearings up to 160 °C, and up to 180 °C (short term) with appropriate relubrication intervals.

Klüberfood NH1 74-401 is NSF H1-registered and complies with FDA 21 CFR § 178.3570.

Benefits for your application

• Simplification: reduced number of products

  • due to the suitability for many applications

  • due to the wide temperature range

  • due to the suitability for both manual and centralised lubrication systems

• Cost saving and production reliability

  • due to the prolonged service intervals also at medium/high temperature

  • due to the good load-carrying capacity

• Full compliance with the higher food safety standards

  • due to the NSF H1 registration and ISO 21469 certification

  • due to the high performance enabling lower lubricant quantities in the production process

• Risk management improvement

  • due to the lower number of operator lubrication tasks

Product description

Klüberfood NH1 64-422 is a special lubricating grease composed of a synthetic base oil and silicate thickener. This special NSF H1 registered grease has been designed for the lubrication of rolling bearings under the varying operating conditions of the food-processing industry.

Klüberfood NH1 64-422 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 64-422 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Good wear protection and component life resulting from high base oil viscosity

• Good sealing protection of bearing to prevent ingress of moisture and enhancing reliability

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 6-180 / NH1 6-10 is a ready to use, stable aqueous solution of special synthetic fluid with lubricating and sliding properties for applications in the food processing industry, especially in the confectionery industry.

Klüberfood NH1 6-180 / NH1 6-10 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The oil was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 6-180 / NH1 6-10 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• A contributor to reduced wear and component costs resulting from good penetrative and corrosion protection properties

• Potential reduction in contamination levels with a greater resistance to sugar build up

• Supporting productivity when used in the deep drawing of aluminium bottle caps due to good separating properties

• NSF H1 registered supporting process reliability

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 6-180 / NH1 6-10 is a ready to use, stable aqueous solution of special synthetic fluid with lubricating and sliding properties for applications in the food processing industry, especially in the confectionery industry.

Klüberfood NH1 6-180 / NH1 6-10 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The oil was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 6-180 / NH1 6-10 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• A contributor to reduced wear and component costs resulting from good penetrative and corrosion protection properties

• Potential reduction in contamination levels with a greater resistance to sugar build up

• Supporting productivity when used in the deep drawing of aluminium bottle caps due to good separating properties

• NSF H1 registered supporting process reliability

• ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. You will find further information on ISO Standard 21469 on our website 

Product description

Klüberfood NH1 4-002 is a spray with special oils which are neutral in odour and taste.

The use of Klüberfood NH1 4-002 is a contributor towards the supporting of food safety. This needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely.

Klüberfood NH1 4-002 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 4-002 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Good penetrating properties and water displacement

• NSF H1 registered supporting process reliability

Product description

As a manufacturer or operator of feed pellet presses, you are likely to prefer a versatile lubricating grease which can be applied to various friction points, facilitating your work processes in initial and relubrication and also preventing mix-up.

Klüberfood NH1 34-401 is a synthetic grease based on a special calcium complex thickener. It is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570.

The use of Klüberfood NH1 34-401 can contribute to increased reliability of your production equipment and processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Klüberfood NH1 34-401 offers very good adhesion and resistance to water, besides a very low friction torque, which contributes to smooth operation of the bearings, even during start-up. All these effects help reduce your maintenance expenses.

Benefits for your application

• Considerable cost savings through

  • lower lubricant consumption, even when exposed to high loads

  • attractive price-performance ratio

  • reduction of number of lubricants due to wide range of possible applications

• Longer component life due to good load-carrying capacity and good resistance to wear

• Low breakaway torque even after longer periods of standstill ("Monday-morning effect")

• Easy and convenient application via centralised lubrication systems

Product description

Klüberfood NH1 14-261 is composed of a highly refined base oil and a special aluminium complex soap thickener. Excellent flow characteristics ensure the lubrication points are reliably supplied with lubricant.

Klüberfood NH1 14-261 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 14-261 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Reduced wear due to the excellent load-carrying capacity

• Very good flow characteristics ensure the lubrication point, also in roller bearings, is reliably supplied with lubricant and extend the component life

• NSF H1 registered supporting process reliability

Product description

Klüberfood NH1 14-222 Spray was developed to meet the special requirements of the food-processing and pharmaceutical industries.

Klüberfood NH1 14-222 Spray is a speciality grease based on a synthetic hydrocarbon oil and an aluminium complex soap.

Klüberfood NH1 14-222 Spray is NSF H1 registered and was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberfood NH1 14-222 Spray can contribute to increase safety of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

Benefits for your application

• Fully synthetic grease for long relubrication intervals

• Easy spray application

• Facilitates product streamlining owing to its wide range of applications

• Offers improved surface protection through good water resistance

• NSF H1-registered increasing process reliability