价格:1.00/ 桶
品牌: Shell Irus Fluids DU46【壳牌】天天快车
起订:10 桶
供应:100 桶
发货:1天内
信息标签:Shell Irus Fluids DU46【壳牌】天天快车,供应,能源,润滑油(脂)

点击这里进行电话呼叫

点击这里QQ咨询

联系时一定要说在【贸易商务资源网】看到的将给您优惠！如果您也想和该公司一样在网站发信息有好排名，点击立即免费注册，发布产品推广。

 润滑油0755-29672358 传真0755-29671978 ，133-9219-6659，158-2079-1590谭女士 QQ2535078038，159-9952-6096吴先生，QQ1305716027。

Shell Irus Fluids DU  High performance less flammable hydraulic fluids  Shell Irus Fluids DU are advanced, synthetic, anhydrous less flammable hydraulic  fluids based on organic esters and proven additives. These ISO Class HFDU fluids  are specially designed to provide good performance in conventional hydraulic  systems and have better fire resistance than mineral oils. They are also  biodegradable with a low ecotoxicity, and are particularly suited for use in  environmentally sensitive areas.  Applications  • Typical applications for Irus DU are to be  found in the tunnel boring, metal, mining and  glass industries. Irus Fluids can replace  mineral oils in hydraulic installations to  provide good lubrication and a higher degree  of fire resistance.  Performance Features and Benefits  • Lower flammability than mineral oils. • Readily biodegradable - biodegraded by >60%  after 28 days when tested in OECD 301 B (CO2 evolution test). • Low ecotoxicity - ‘not harmful’ to plants (algae),  invertebrates (Daphnia sp.) and fish; EL50/LL50 >100 mg/l when tested as water-accommodated  fractions in OECD 201, OECD 202 and OECD  203.  • Excellent viscosity/temperature characteristics -  minimum change of viscosity with variation in  operating temperature, giving true ‘multigrade’  characteristics. • Pump anti-wear protection similar to mineral  hydraulic oils. • Low flammability maintained during the life of the  fluid. • Excellent corrosion protection. • Compatible with most materials specified for use  with mineral oils. Specification and Approvals  Irus DU meets the requirements of:  Classification HFDU according to ISO 6743-4  ISO 12922 Specifications for fire-resistant  hydraulic fluids - category HFDU  The European Communities Mines Safety  Commission 7th Report - Requirements for  less flammable fluids ('7th Luxembourg  Report').  Irus Fluid DU is approved by:  Eaton for Industrial and mobile hydraulic  systems according to Brochure 694  requirements.  Change-over Procedure  In order to achieve maximum benefits from the  use of Irus DU, it is necessary to completely drain all mineral oil from the hydraulic circuit prior to filling with fresh fluid. A detailed change-over  procedure can be obtained from your Shell  representative.  Storage  Drums must be kept sealed in weatherproof  conditions, in order to prevent contamination by  water or dust.  Seal Compatibility  Irus DU are compatible with seal and paint  materials normally specified for use with mineral  oils, except those made from natural rubber.  More details are given in the attached "Typical  Physical Characteristics" table.  Advice  Advice on applications not covered in this leaflet  may be obtained from your Shell representative.  Health and Safety  Guidance on Health and Safety are available on  the appropriate Material Safety Data Sheet which  can be obtained from your Shell representative.  Protect the environment  Take used oil to an authorised collection point. Do  not discharge into drains, soil or water.